fischer Zykon panel anchor FZP 13 x 41 M8/SO/19 SH AL

Name: fischer Zykon panel anchor FZP 13 x 41 M8/SO/19 SH AL
Brand: fischer

Produktvarianter

Download billede

Primære funktioner

Stand-off installation of panels with tolerances.
Compensation of panel thickness tolerances for highest visual requirements.
Designed for natural stones class IV.
Stress-free fixing enables high loads and use of thin panels.
Sleeve made of stainless steel.

Varenr. 061500
SBN 502
Varenr. 540698
FZPB 13/38 CNC
Varenr. 802506
STU 10 - 30
Varenr. 802507
MST-D
Varenr. 521668
MUTTER M8 A4
Varenr. 521670
Lock nut M8 A4

The undercut anchor for soft stone façade panels.

Fordele

The adapted shape of the undercut anchor ensures a positive-locking attachment free from expansion pressure in a conical undercut drill hole.
The fixing of the undercut anchor is not visible on the exposed side, creating a visually attractive and consistent façade surface.
Setting the anchor using undercut technology allows the user to always select the optimal structural position in the façade panel. This greatly reduces panel deflection.
The anchor allows for higher pull-out loads, compared to commonly available systems.
Using a constant remaining wall thickness as a reference value when drilling holes allows users to compensate panel thickness tolerances.

The concealed stand-off installation solution for heavy façade panels made of selected soft natural stone (stone group IV - sedimentary rock). This technology defines a constant distance between the front of the panel to the connection face on the FZP II anchor (RWT = remaining wall thickness) as a reference dimension for drilling. This technology can be used to compensate panel thickness tolerances and create a flat façade surface by using stand-off installation anchors.

Funktionsmåde

Wet diamond drilling - first cylindrical to a constant reference dimension for the remaining wall thickness (RWT), then conical to create an undercut drill hole.
When the undercut anchor is installed, an optimal positive-locking connection is created between the expanding part and the drill hole.
The anchor is installed in the conical undercut drill hole using stand-off installation.
The ability to compensate for panel thickness tolerances helps create a flat façade surface.

Installation FZP SH R - flush

1 / 4

Installation FZP SH R/AL - stand-off

1 / 6

min. pladetykkelse	50 mm
Sættedybde	30 - 36 mm
Total længde( l )	64 mm
Ankerlængde efter ekspansion	41 mm
Fri gevindlængde/nyttelængde	23 mm
Gevind( M )	M8
Cylindrisk diameter	13 mm
Underskæringsdiameter	17,3 mm
System	FZP System
Antal	50 St.
GTIN (EAN-Code)	4048962171518

fischer Zykon panel anchor FZP 13 x 41 M8/SO/19 SH AL

Fordelene / Produktbeskrivelse

Anvendelse og godkendelse

Monteringsvejledning

Teknisk data