fischer Zykon panel anchor FZP II 13 x 26 M8/SO/12 AL

Varenr. 061500
SBN 502
Varenr. 060711
FZPB 13
Varenr. 092880
FZPB 11/28
Varenr. 804063
CNC adapter
Varenr. 540698
FZPB 13/38 CNC
Varenr. 802506
STU 10 - 30
Varenr. 802507
MST-D
Varenr. 802337
HVL 13
Varenr. 802338
DPL 13
Varenr. 044638
FZE 12 plus
Varenr. 521668
MUTTER M8 A4
Varenr. 521670
Lock nut M8 A4

The adjusting undercut anchor made of A4 stainless steel for natural stone.

Fordele

The adapted shape of the undercut anchor ensures a positive-locking attachment free from expansion pressure in a conical undercut drill hole.
The fixing of the undercut anchor is not visible on the exposed side, creating a visually attractive and consistent façade surface.
Setting the anchor using undercut technology allows the user to always select the optimal structural position in the façade panel. This greatly reduces panel deflection.
The anchor allows for higher pull-out loads, compared to commonly available systems.
Using a constant remaining wall thickness as a reference value when drilling holes allows users to compensate panel thickness tolerances.

The concealed stand-off installation solution using A4 stainless steel undercut anchors for heavy natural stone façade panels. This technology defines a constant distance between the front of the panel to the connection level on the FZP II anchor (RWT = remaining wall thickness as a reference dimension for drilling. This technology can be used to compensate the tolerances of panel thicknesses to create a flat façade surface by using stand-off installation anchors.

Funktionsmåde

Wet diamond drilling - first cylindrical to a constant reference dimension for the remaining wall thickness (RWT), then conical to create an undercut drill hole.
When the undercut anchor is installed, an optimal positive-locking connection is created between the expanding part and the drill hole.
The anchor is installed in the conical undercut drill hole using stand-off installation.
The ability to compensate for panel thickness tolerances helps create a flat façade surface.

Installation FZP II SO R/AL - stand-off

1 / 6

ETA godkendelse
min. pladetykkelse	30 mm
Sættedybde	15 - 21 mm
Total længde( l )	38 mm
Ankerlængde efter ekspansion	26 mm
Fri gevindlængde/nyttelængde	12 mm
Gevind( M )	M8
Cylindrisk diameter	13 mm
Underskæringsdiameter	15,5 mm
Seismisk godkendelse	C1 / C2
System	FZP System
Antal	250 St.
GTIN (EAN-Code)	4048962260984

fischer Zykon panel anchor FZP II 13 x 26 M8/SO/12 AL

Fordelene / Produktbeskrivelse

Anvendelse og godkendelse

Monteringsvejledning

Teknisk data

Dokumenter til download