The concealed fixing solution for thin ceramic and fine stoneware façade panels. Use in conjunction with clasps systems on façades or with other attachments.
Legende = Tilladelse tilgængelig— = Tilladelse ikke tilgængelig
Set 5 af 5 variant(er)
Fordelene / Produktbeskrivelse
Fordele
The anchors’ short geometry allows it to be used in thin panels with a thickness greater than 10 mm.
The fixing of the undercut anchor is not visible on the exposed side, creating a visually attractive and consistent façade surface.
The adapted shape of the undercut anchor ensures a positive-locking attachment free from expansion pressure in a conical undercut drill hole.
Setting the anchor using undercut technology allows the user to always select the optimal structural position in the façade panel. This greatly reduces panel deflection.
The positive-locking anchor is free from expansion pressure provides much better holding force than commonly available systems and allows for the use of large-format panels.
Anvendelse og godkendelse
Applikationer
Exterior façades
Interior façades
Façade reveals
Byggematerialer
Ceramics
Fine stoneware (>10mm)
Du kan finde detaljeret information om byggematerialer i registreringsdokumentet.
Godkendelser
ETA-23/0756
ETA-23/0035
ETA-22/0400
DoP No. 0359
DoP No. 0364
DoP No. 0322
Monteringsvejledning
Funktionsmåde
Use wet diamond drilling - first cylindrical, then conical - to drill an undercut hole.
When the undercut anchor is installed, an optimal positive-locking connection is created between the expanding part and the drill hole.
The anchor is installed flush to the absolute anchoring depth. After the anchor is set, the spacer washer will be in full contact with the surface of the material.
European Technical Assessment for fischer ZYKON FZP II T D40 PA for fixing Atlas Concorde facade panels - Fastener of external wall claddings. Special anchor for the rear fixing of Atlas Concorde ceramic tile facade panels
