fischer Zykon panel anchor Tergo+ 11 x 8 M6/T/10 PA

Name: fischer Zykon panel anchor Tergo+ 11 x 8 M6/T/10 PA
Brand: fischer

Produktvarianter

Download billede

Primære funktioner

Designet til tynde plader, såsom fibercement eller HPL.
Spændingsfri montering muliggør høje belastninger og brug af tynde plader.
Distance-skiverne sikrer en kontrolleret, spændingsfri rotation af monteringsdelene.

Varenr. 802484
BSN 101T
Varenr. 522402
FZPB 11T D12
Varenr. 522398
FZPB 11T CNC
Varenr. 541464
FZPB 11T CNC-DIA
Varenr. 802506
STU 10 - 30
Varenr. 802507
MST-D
Varenr. 802732
HVL 11T
Varenr. 804089
DPL 11T

The specialist for thin fibre cement façade panels by Equitone.

Fordele

The anchors’ short geometry allows it to be used in thin panels with a thickness greater than 8 mm.
The fixing of the undercut anchor is not visible on the exposed side, creating a visually attractive and consistent façade surface.
The adapted shape of the undercut anchor ensures a positive-locking attachment free from expansion pressure in a conical undercut drill hole.
Setting the anchor using undercut technology allows the user to always select the optimal structural position in the façade panel. This greatly reduces panel deflection.
The positive-locking anchor is free from expansion pressure and is attached at the fifth point in a structurally optimised location. This provides much better holding force than commonly available systems and allows for the use of large-format panels.

The concealed fixing solution for thin fibre cement façade panels from Equitone bigger than 8 mm in thickness, such as linea, tectiva, materia, natura, pictura. Use in conjunction with clasps systems on façades or with other attachments.

Funktionsmåde

Use dry drilling with a diamond drill bit - first cylindrical, then conical - to drill an undercut hole.
When the undercut anchor is installed, an optimal, positive-locking connection is created between the expanding part and the drill hole.
The anchor is installed flush to the absolute anchoring depth. After the anchor is set, the spacer washer will be in full contact with the surface of the material.

Installation FZP II T Tergo+

1 / 4

ETA godkendelse
min. pladetykkelse	10 mm
Sættedybde	8 mm
Total længde( l )	20,5 mm
Ankerlængde efter ekspansion	10,5 mm
Fri gevindlængde/nyttelængde	10 mm
Gevind( M )	M6
Cylindrisk diameter	11 mm
Underskæringsdiameter	13,5 mm
Farveskive	gul
Seismisk godkendelse	C1 / C2
System	FZP System
Antal	250 St.
GTIN (EAN-Code)	4048962260014

fischer Zykon panel anchor Tergo+ 11 x 8 M6/T/10 PA

Fordelene / Produktbeskrivelse

Anvendelse og godkendelse

Monteringsvejledning

Teknisk data