Name: ATK601 Set Z-14/140-T60/80/3 gvz
Brand: fischer

The ATK 601 wall holder set for push-through installation as a rod system.

Fordele

Enables retrofitting of ventilated rainscreen façades.
By means of the push-through and stand-off installation, the wall holder can also be used in already insulated substrates.
Applicable for horizontal and vertical systems.
The passive house certification guarantees sustainable and energy-efficient fixing.
Different load levels are applicable through multiple anchorage depths.

The ATK 601 wall holder sets consist of an SXRL frame fixing, which absorbs the shear, tension and compressive forces, as well as an attachment part and a T-piece. Depending on the orientation of the T-piece, a vertical or horizontal aluminum subframe system can be assembled to the wall holder. The wall holder set is used as a rod system.

DOP - Declaration of Performance

pdf, DoP: BWM-LE-005

Declaration of Performance for parts for subframe system construction made of aluminium / stainless steel for building envelopes (Wall brackets, wall holders, extrusion profiles, clasps, fixing clamps) - Structural design: No performance declared

Oprettet den 08.05.2024

DOP - Declaration of Performance

pdf, DoP: BWM-LE-006

Declaration of Performance for parts for subframe system construction made of aluminium / stainless steel for building envelopes (Wall brackets, wall holders, extrusion profiles, clasps, fixing clamps) - Structural design: According to EN 1999 or EN 1993, see design specifications and calculations

Oprettet den 08.05.2024

DOP - Declaration of Performance

pdf, DoP: BWM-LE-007

Declaration of Performance for parts for subframe system construction made of aluminium / stainless steel for building envelopes (Wall brackets, wall holders, extrusion profiles, clasps, fixing clamps) - Structural design: Provided by ordering party

Oprettet den 08.05.2024

DOP - Declaration of Performance

pdf, DoP: BWM-LE-008

Declaration of Performance for parts for subframe system construction made of aluminium / stainless steel for building envelopes (Wall brackets, wall holders, extrusion profiles, clasps, fixing clamps) - Structural design: According to specification by the ordering party

Oprettet den 08.05.2024

Længde	60 mm
Bredde	50 mm
Højde( H )	60 mm
Tykkelse	3 mm
Hulmønster	4x 4,1 mm
Hulmønsterprofil	2x 5,1 / 2x 5,5x15 mm
Bordiameter( d₀ )	14 mm
Min. borhulsdybde( h₁ )	155 mm
Længde L2	130 / 110 mm
Nyttelængde ved sættedybde 70 mm( t_fix )	62 mm
Nyttelængde ved sættedybde 90 mm( t_fix )	42 mm
Ankerlængde( l )	140 mm
System	—
Antal	1 St.
GTIN (EAN-Code)	4048962398649

ATK601 Set Z-14/140-T60/80/3 gvz

Fordelene / Produktbeskrivelse

Anvendelse og godkendelse

Monteringsvejledning

Teknisk data

Dokumenter til download