The adjusting undercut anchor made of A4 stainless steel for natural stone.

Zykon-Panel anchor FZP II SO AL

The concealed stand-off installation solution using A4 stainless steel undercut anchors for heavy natural stone façade panels. This technology defines a constant distance between the front of the panel to the connection level on the FZP II anchor (RWT = remaining wall thickness as a reference dimension for drilling. This technology can be used to compensate the tolerances of panel thicknesses to create a flat façade surface by using stand-off installation anchors.

Produktvarianter

Download billede

Produktvarianter

Godkendelser / Testrapporter

5 Produktvariant(er)

min. pladetykkelse

Total længde

Gevind

Cylindrical diameter

Undercutdiameter

Antal

Legende = Tilladelse tilgængelig— = Tilladelse ikke tilgængelig

Set 5 af 5 variant(er)

Fordele

The adapted shape of the undercut anchor ensures a positive-locking attachment free from expansion pressure in a conical undercut drill hole.
The fixing of the undercut anchor is not visible on the exposed side, creating a visually attractive and consistent façade surface.
Setting the anchor using undercut technology allows the user to always select the optimal structural position in the façade panel. This greatly reduces panel deflection.
The anchor allows for higher pull-out loads, compared to commonly available systems.
Using a constant remaining wall thickness as a reference value when drilling holes allows users to compensate panel thickness tolerances.

Funktionsmåde

Wet diamond drilling - first cylindrical to a constant reference dimension for the remaining wall thickness (RWT), then conical to create an undercut drill hole.
When the undercut anchor is installed, an optimal positive-locking connection is created between the expanding part and the drill hole.
The anchor is installed in the conical undercut drill hole using stand-off installation.
The ability to compensate for panel thickness tolerances helps create a flat façade surface.

Installation FZP II SO R/AL - stand-off

1 / 6

ETA godkendelse
min. pladetykkelse	20 mm
Total længde ( l )	30 mm
Gevind ( M )	M6
Cylindrical diameter	11 mm
Undercutdiameter	13,5 mm
Antal	250 St.
GTIN (EAN-Code)	4048962112559

ETA godkendelse
min. pladetykkelse	20 mm
Total længde ( l )	33 mm
Gevind ( M )	M6
Cylindrical diameter	11 mm
Undercutdiameter	13,5 mm
Antal	250 St.
GTIN (EAN-Code)	4048962112566

ETA godkendelse
min. pladetykkelse	30 mm
Total længde ( l )	38 mm
Gevind ( M )	M8
Cylindrical diameter	13 mm
Undercutdiameter	15,5 mm
Antal	250 St.
GTIN (EAN-Code)	4048962260984
BWM	538088

ETA godkendelse
min. pladetykkelse	30 mm
Total længde ( l )	43 mm
Gevind ( M )	M8
Cylindrical diameter	13 mm
Undercutdiameter	15,5 mm
Antal	250 St.
GTIN (EAN-Code)	4048962112573
BWM	512146

ETA godkendelse
min. pladetykkelse	30 mm
Total længde ( l )	43 mm
Gevind ( M )	M8
Cylindrical diameter	13 mm
Undercutdiameter	15,5 mm
Antal	250 St.
GTIN (EAN-Code)	4048962121193

Zykon-Panel anchor FZP II SO AL

Produktvarianter

Fordelene / Produktbeskrivelse

Ansøgning og godkendelse

Samlevejledning

Dokumenter til download