fischer Zykon panel anchor Tergo+ 11 x 5 M6/T/13 PA

The specialist for thin fibre cement façade panels by Equitone.

Fordele

The anchors’ short geometry allows it to be used in thin panels with a thickness greater than 8 mm.
The fixing of the undercut anchor is not visible on the exposed side, creating a visually attractive and consistent façade surface.
The adapted shape of the undercut anchor ensures a positive-locking attachment free from expansion pressure in a conical undercut drill hole.
Setting the anchor using undercut technology allows the user to always select the optimal structural position in the façade panel. This greatly reduces panel deflection.
The positive-locking anchor is free from expansion pressure and is attached at the fifth point in a structurally optimised location. This provides much better holding force than commonly available systems and allows for the use of large-format panels.

The concealed fixing solution for thin fibre cement façade panels from Equitone bigger than 8 mm in thickness, such as linea, tectiva, materia, natura, pictura. Use in conjunction with clasps systems on façades or with other attachments.

Funktionsmåde

Use dry drilling with a diamond drill bit - first cylindrical, then conical - to drill an undercut hole.
When the undercut anchor is installed, an optimal, positive-locking connection is created between the expanding part and the drill hole.
The anchor is installed flush to the absolute anchoring depth. After the anchor is set, the spacer washer will be in full contact with the surface of the material.

Mounting Strip 1 Picture

1 / 4

1
2
3
4

Sættedybde ( h_ef )	5 mm
min. pladetykkelse	8 mm
Type	Dünnplattenanker
Total længde ( l )	7,5 mm
Projection length	13 mm
Gevind ( M )	M6
Cylindrical diameter	11 mm
Undercutdiameter	13,5 mm
Materiale	A4
Materiale endetylle	Polyamid
Farve	orange
Antal	250 St.
GTIN (EAN-Code)	4048962362107

fischer Zykon panel anchor Tergo+ 11 x 5 M6/T/13 PA

Fordelene / Produtbeskrivelse

Anvendelser

Monteringsvejledning

Teknisk data